Generate the key and the certificate for each machine in the cluster using the Java keytool utility. See Generate TLS Certificates.

Make sure that the common name (CN) matches the fully qualified domain name (FQDN) of your server. The client compares the CN with the DNS domain name to ensure that it is connecting to the correct server.

You have generated a public-private key pair for each machine, and a certificate to identify the machine. However, the certificate is unsigned, so an attacker can create a certificate and pretend to be any machine. Sign certificates for each machine in the cluster to prevent unauthorized access.

A Certificate Authority (CA) is responsible for signing certificates. A CA is similar to a government that issues passports. A government stamps (signs) each passport so that the passport becomes difficult to forge. Similarly, the CA signs the certificates, and the cryptography guarantees that a signed certificate is computationally difficult to forge. If the CA is a genuine and trusted authority, the clients have high assurance that they are connecting to the authentic machines.

openssl req -new -x509 -keyout ca-key -out ca-cert -days 365

The generated CA is a public-private key pair and certificate used to sign other certificates.

Add the generated CA to the client truststores so that clients can trust this CA:

keytool -keystore {client.truststore.jks} -alias CARoot -import -file {ca-cert}

Note: If you configure Kafka brokers to require client authentication by setting ssl.client.auth to be requested or required on the Kafka brokers config, you must provide a truststore for the Kafka brokers as well. The truststore should have all the CA certificates by which the clients keys are signed.The keystore created in step 1 stores each machine’s own identity. In contrast, the truststore of a client stores all the certificates that the client should trust. Importing a certificate into a truststore means trusting all certificates that are signed by that certificate. This attribute is called the chain of trust. It is particularly useful when deploying SSL on a large Kafka cluster. You can sign all certificates in the cluster with a single CA, and have all machines share the same truststore that trusts the CA. That way, all machines can authenticate all other machines.

Now you can sign all certificates generated by step 1 with the CA generated in step 2.

1. Create a certificate request from the keystore:

   keytool -keystore server.keystore.jks -alias localhost -certreq -file cert-file

   where:

   • keystore: the location of the keystore
   • cert-file: the exported, unsigned certificate of the server
2. Sign the resulting certificate with the CA (in the real world, this can be done using a real CA):

   openssl x509 -req -CA ca-cert -CAkey ca-key -in cert-file -out cert-signed -days validity -CAcreateserial -passin pass:ca-password

   where:

   • ca-cert: the certificate of the CA
   • ca-key: the private key of the CA
   • cert-signed: the signed certificate of the server
   • ca-password: the passphrase of the CA
3. Import both the certificate of the CA and the signed certificate into the keystore:

   keytool -keystore server.keystore.jks -alias CARoot -import -file ca-cert
   keytool -keystore server.keystore.jks -alias localhost -import -file cert-signed

The following Bash script demonstrates the steps described above. One of the commands assumes a password of SamplePassword123, so either use that password or edit the command before running it.

#!/bin/bash
#Step 1
keytool -keystore server.keystore.jks -alias localhost -validity 365 -genkey
#Step 2
openssl req -new -x509 -keyout ca-key -out ca-cert -days 365
keytool -keystore server.truststore.jks -alias CARoot -import -file ca-cert
keytool -keystore client.truststore.jks -alias CARoot -import -file ca-cert
#Step 3
keytool -keystore server.keystore.jks -alias localhost -certreq -file cert-file
openssl x509 -req -CA ca-cert -CAkey ca-key -in cert-file -out cert-signed -days 365 -CAcreateserial -passin pass:SamplePassword123
keytool -keystore server.keystore.jks -alias CARoot -import -file ca-cert
keytool -keystore server.keystore.jks -alias localhost -import -file cert-signed

Kafka Brokers support listening for connections on multiple ports. If SSL is enabled for inter-broker communication (see below for how to enable it), both PLAINTEXT and SSL ports are required.

To configure the listeners from Cloudera Manager, perform the following steps:

1. In Cloudera Manager, go to Kafka > Instances.
2. Go to Kafka Broker > Configurations.
3. In the Kafka Broker Advanced Configuration Snippet (Safety Valve) for Kafka Properties, enter the following information:

   listeners=PLAINTEXT://kafka-broker-host-name:9092,SSL://kafka-broker-host-name:9093
   advertised.listeners=PLAINTEXT://kafka-broker-host-name:9092,SSL://kafka-broker-host-name:9093

   where kafka-broker-host-name is the FQDN of the broker that you selected from the Instances page Cloudera Manager. In the above sample configurations we used PLAINTEXT and SSL protocols for the SSL enabled brokers.

   For information about other supported security protocols, see Using Kafka’s Inter-Broker SecurityUsing Kafka Supported Protocols.

4. Repeat the previous step for each broker.

   The advertised.listeners configuration is needed to connect the brokers from external clients.

5. Deploy the above client configurations and rolling restart the Kafka service from Cloudera Manager.

Kafka CSD auto-generates listeners for Kafka brokers, depending on your SSL and Kerberos configuration. To enable SSL for Kafka installations, do the following:

1. Turn on SSL for the Kafka service by turning on the ssl_enabled configuration for the Kafka CSD.
2. Set security.inter.broker.protocol as SSL, if Kerberos is disabled; otherwise, set it as SASL_SSL.

The following SSL configurations are required on each broker. Each of these values can be set in Cloudera Manager. Be sure to replace this example with the truststore password.

For instructions, see Changing the Configuration of a Service or Role Instance.

ssl.keystore.location=/var/private/ssl/kafka.server.keystore.jks
ssl.keystore.password=SamplePassword123
ssl.key.password=SamplePassword123
ssl.truststore.location=/var/private/ssl/server.truststore.jks
ssl.truststore.password=SamplePassword123

Other configuration settings may also be needed, depending on your requirements:

• ssl.client.auth=none: Other options for client authentication are required, or requested, where clients without certificates can still connect. The use of requested is discouraged, as it provides a false sense of security and misconfigured clients can still connect.
• ssl.cipher.suites: A cipher suite is a named combination of authentication, encryption, MAC, and a key exchange algorithm used to negotiate the security settings for a network connection using TLS or SSL network protocol. This list is empty by default.
• ssl.enabled.protocols=TLSv1.2,TLSv1.1,TLSv1: Provide a list of SSL protocols that your brokers accept from clients.
• ssl.keystore.type=JKS
• ssl.truststore.type=JKS

Communication between Kafka brokers defaults to PLAINTEXT. To enable secured communication, modify the broker properties file by adding security.inter.broker.protocol=SSL

For a list of the supported communication protocols, see Using Kafka’s Inter-Broker Security.

  Note: Due to import regulations in some countries, Oracle implementation of JCA limits the strength of cryptographic algorithms. If you need stronger algorithms you must obtain the JCE Unlimited Strength Jurisdiction Policy Files and install them in the JDK/JRE as described in JCA Providers Documentation.

After SSL is configured your broker, logs should show an endpoint for SSL communication:

with addresses: PLAINTEXT -> EndPoint(192.168.1.1,9092,PLAINTEXT),SSL -> EndPoint(192.168.1.1,9093,SSL)

You can also check the SSL communication to the broker by running the following command:

openssl s_client -debug -connect localhost:9093 -tls1

This check can indicate that the server keystore and truststore are set up properly.

  Note: ssl.enabled.protocols should include TLSv1.

The output of this command should show the server certificate:

-----BEGIN CERTIFICATE-----
{variable sized random bytes}
-----END CERTIFICATE-----
subject=/C=US/ST=CA/L=Palo Alto/O=org/OU=org/CN=Franz Kafka
issuer=/C=US/ST=CA/L=Palo Alto
/O=org/OU=org/CN=kafka/emailAddress=kafka@your-domain.com

If the certificate does not appear, or if there are any other error messages, your keystore is not set up properly.

SSL is supported only for the new Kafka producer and consumer APIs. The configurations for SSL are the same for both the producer and consumer.

If client authentication is not required in the broker, the following example shows a minimal configuration:

security.protocol=SSL
ssl.truststore.location=/var/private/ssl/kafka.client.truststore.jks
ssl.truststore.password=SamplePassword123

If client authentication is required, a keystore must be created as in step 1, it needs to be signed by the CA as in step 3, and you must also configure the following properties:

ssl.keystore.location=/var/private/ssl/kafka.client.keystore.jks
ssl.keystore.password=SamplePassword123
ssl.key.password=SamplePassword123

Other configuration settings might also be needed, depending on your requirements and the broker configuration:

• ssl.provider (Optional). The name of the security provider used for SSL connections. Default is the default security provider of the JVM.

• ssl.cipher.suites (Optional). A cipher suite is a named combination of authentication, encryption, MAC, and a key exchange algorithm used to negotiate the security settings for a network connection using TLS or SSL network protocol.

• ssl.enabled.protocols=TLSv1.2,TLSv1.1,TLSv1. This property should list at least one of the protocols configured on the broker side

• ssl.truststore.type=JKS

• ssl.keystore.type=JKS

The following steps describe how to configure Kafka to use Sentry authorization. These steps assume you have installed Kafka and Sentry on your cluster.

Sentry requires that your cluster include HDFS. After you install and start Sentry with the correct configuration, you can stop the HDFS service. For more information, see Installing and Upgrading the Sentry Service.

  Note: Cloudera's distribution of Kafka can make use of LDAP-based user groups when the LDAP directory is synchronized to Linux via tools such as SSSD. CDK does not support direct integration with LDAP, either through direct Kafka's LDAP authentication, or via Hadoop's group mapping (when hadoop.group.mapping is set to LdapGroupMapping). For more information, see Configuring LDAP Group Mappings.

To configure Sentry authentication for Kafka:

1. In Cloudera Manager, go to Kafka > Configuration > .
2. Select Enable Kerberos Authentication.
3. Select a Sentry service in the Kafka service configuration.
4. Add superusers.

   Superusers can perform any action on any resource in the Kafka cluster. The kafka user is added as a superuser by default. Superuser requests are authorized without going through Sentry, which provides enhanced performance.

5. Select Enable Sentry Privileges Caching to enhance performance.
6. Restart the Sentry services.

Authorizable resources are resources or entities in a Kafka cluster that require special permissions for a user to be able to perform actions on them. Kafka has four authorizable resources.

• Cluster controls who can perform cluster-level operations such as creating or deleting a topic. This resource can only have one value, kafka-cluster, as one Kafka cluster cannot have more than one cluster resource.
• Topic controls who can perform topic-level operations such as producing and consuming topics. Its value must match exactly the topic name in the Kafka cluster.

  With CDH 5.15.0 and CDK 3.1 and later, wildcards (*) can be used to refer to any topic in the privilege.

• Consumergroup controls who can perform consumergroup-level operations such as joining or describing a consumergroup. Its value must exactly match the group.id of a consumergroup.

  With CDH 5.14.1 and later, you can use a wildcard (*) to refer to any consumer groups in the privilege. This resource is useful when used with Spark Streaming, where a generated group.id may be needed.

• Host controls from where specific operations can be performed. Think of this as a way to achieve IP filtering in Kafka. You can set the value of this resource to the wildcard (*), which represents all hosts.

You can perform multiple actions on each resource. The following operations are supported by Kafka, though not all actions are valid on all resources.

• ALL is a wildcard action, and represents all possible actions on a resource.
• read
• write
• create
• delete
• alter
• describe
• clusteraction

Privileges define what actions are allowed on a resource. A privilege is represented as a string in Sentry. The following rules apply to a valid privilege.

• Can have at most one Host resource. If you do not specify a Host resource in your privilege string, Host=* is assumed.
• Must have exactly one non-Host resource.
• Must have exactly one action specified at the end of the privilege string.

For example, the following are valid privilege strings:

Host=*->Topic=myTopic->action=ALL
Topic=test->action=ALL

The following examples grant privileges to the role test, so that users in testGroup can create a topic named testTopic and produce to it.

The user executing these commands must be added to the Sentry parameter sentry.service.allow.connect and also be a member of a group defined in sentry.service.admin.group.

Before you can assign the test role, you must first create it. To create the test role:

$ kafka-sentry -cr -r test

To confirm that the role was created, list the roles:

$ kafka-sentry -lr

If Sentry privileges caching is enabled, as recommended, the new privileges you assign take some time to appear in the system. The time is the time-to-live interval of the Sentry privileges cache, which is set using sentry.kafka.caching.ttl.ms. By default, this interval is 30 seconds. For test clusters, use a lower value, such as 1 s.

1. Allow users in testGroup to write to testTopic from localhost, which allows users to produce to testTopic.

   $ kafka-sentry -gpr -r test -p "Host=127.0.0.1->Topic=testTopic->action=write"
   

2. Assign the test role to the group testGroup:

   $ kafka-sentry -arg -r test -g testGroup

3. Verify that the test role is part of the group testGroup:

   $ kafka-sentry -lr -g testGroup

4. Create testTopic.

   $ kafka-topics --create --zookeeper localhost:2181 \
     --replication-factor 1 \
     --partitions 1 --topic testTopic
   $ kafka-topics --list --zookeeper localhost:2181 testTopic

Now you can produce to and consume from the Kafka cluster.

1. Produce to testTopic.

   Note that you have to pass a configuration file, producer.properties, with information on JAAS configuration and other Kerberos authentication related information. See SASL Configuration for Kafka Clients.

   $ kafka-console-producer --broker-list localhost:9092 \
     --topic testTopic --producer.config producer.properties
     This is a message
     This is another message
   

2. Grant the create privilege to the test role.

   $ kafka-sentry -gpr -r test -p
   "Host=127.0.0.1->Cluster=kafka-cluster->action=create"

3. Allow users in testGroup to describe testTopic from localhost, which the user creates and uses.

   $ kafka-sentry -gpr -r test -p
   "Host=127.0.0.1->Topic=testTopic->action=describe"

4. Grant the describe privilege to the test role.

   $ kafka-sentry -gpr -r test -p
   "Host=127.0.0.1->Consumergroup=testconsumergroup->action=describe"

5. Allow users in testGroup to read from a consumer group, testconsumergroup, that it will start and join.

   $ kafka-sentry -gpr -r test -p
   "Host=127.0.0.1->Consumergroup=testconsumergroup->action=read"

6. Allow users in testGroup to read from testTopic from localhost and to consume from testTopic.

   $ kafka-sentry -gpr -r test -p
   "Host=127.0.0.1->Topic=testTopic->action=read"

7. Consume from testTopic.

   Note that you have to pass a configuration file, consumer.properties, with information on JAAS configuration and other Kerberos authentication related information. The configuration file must also specify group.id as testconsumergroup.

   kafka-console-consumer --new-consumer --topic testTopic \
     --from-beginning --bootstrap-server anybroker-host:9092 \
     --consumer.config client.properties
     This is a message
     This is another message

If Kafka requests are failing due to authorization, the following steps can provide insight into the error:

• Make sure you have run kinit as a user who has privileges to perform an operation.
• Identify which broker is hosting leader of the partition you are trying to produce to or consume from, as this leader is going to authorize your request against Sentry. One easy way of debugging is to just have one Kafka broker. Change log level of the Kafka broker by adding the following entry to the Kafka Broker in Logging Advanced Configuration Snippet (Safety Valve) and restart the broker:

  log4j.logger.org.apache.sentry=DEBUG

  Setting just Sentry to DEBUG mode avoids the debug output from undesired dependencies, such as Jetty.

• Run the Kafka client or Kafka CLI with required arguments and capture the Kafka log, which should be something

  /var/log/kafka/kafka-broker-host-name.log

• Look for following information in the filtered logs:
  • Groups the user Kafka client or CLI is running as.
  • Required privileges for the operation.
  • Retrieved privileges from Sentry.
  • Required and retrieved privileges comparison result.

This log information can provide insight into which privilege is not assigned to a user, causing a particular operation to fail.